Concrete Admixtures > Products > Rheocare HP 700

RHEOCARE HP 700
Plasticizing & Retarding Admixture
RHEOCARE HP 700 is a plasticizing & retarding admixture for concrete which provides a plastic and cohesive concrete mix with increased durability and reduced shrinkage in the hardened state. It provides excellent retention of slump with economical dosages.
• Concreting in high temperature conditions.
• With very low w/c ratio.
• Distance pumping purpose.
• Large pours to prevent cold joints
• General purpose ready mix concrete.
• Highway concrete, bridge deck concreting.
• RCC purpose.
• Self flow concrete up to 50/60 grade of concrete.
• High performance concrete.
• Retarding plasticizer and High water reducing properties.
• Improves workable time by controlled retardation.
• Improves compaction due to increased workability, without bleeding and segregation.
• Reduces shrinkage and Lowers permeability.
• High ultimate strength without Increasing cement content.
• Non staining.
• Compatible with all types of cement & cementitious material.
• Chloride limit as per IS 9103-1999 (Amendment 2007).
Meets the requirement of IS: 9103-1999 (amendment 2007) & ASTM C 494-92, Type G.
Appearance: Amber Color Liquid
Base: Polycarboxylate Ether
Sp. Gravity: 1.05 To 1.20
pH Value: 6-8
Chloride Content: <0.01%
Air Content: <1%
Shelf Life: 12 Months
Generally dosed in the range of 0.8 to 1.3% by weight of cementitious materials. But go For trial mix For finalizing the dosages.

Safety
RHEOCARE HP 700 is non-toxic and inflammable. When in contact with skin, it can be washed with water.

Precaution & Limitation
RHEOCARE HP 700 should not be added in dry mixes under any circumstances if used for cement reduction without loss in strength, the dose of RHEOCARE HP 700 depends on mix design.

Packaging
25 kg, 50 kg, 250 kg HDPE Drum and Tanker Load.

Storage
Keep in dry place under the shade.