Epoxy / PU Flooring > Products > Floorcare Deck PU

Floorcare Deck PU


FLOORCARE DECK PU is a two-component, low viscosity, aliphatic polyurethane car park coating

FLOORCARE DECK-PU is combination of aliphatic polyol polyurethane car deck coating. It has excellent adhesion over primed surface and excellent resistance to UV degradation hence prevent color fading. It provides strong monolithic bond, very high abrasion & sufficient application time to finish the job.

Area of Application
  1. FLOORCARE P primer should be applied on prepared surface, broadcast selected quartz sand evenly on the premiered surface at a spreading rate of 0.4-0.5 ltr/m2.
  2. FLOORCARE DECKPU is pigmented is apply by roller / brush to cure for 3 – 4 hours. Application of second coat, if necessary. Allow to cure for 24 hours prior to any traffic movements.
  3. FLOOR DECK-PU is supplied in pre-packaged in exact ratio. Pour the entire contents of part B into the container of part A. Mix with mechanical drill & paddle at a very low speed for at least 3-4 minutes. After proper mixing to a homogeneous consistency pour the mixed parts A and B in to a fresh container and mix for another minute.

Properties:

Reduction in water permeability

Standards:

As per DIN 1048

Results:

➢ 70%

Properties:

Increase in compressive strength

Standards:

As per IS 516

Results:

0% – 5%

Properties:

Drying shrinkage reduction

Standards:

As per DIN-157-08

Results:

Up to 40%

Properties

Standards

Results

Reduction in water permeability

As per DIN 1048

➢ 70%

Increase in compressive strength

As per IS 516

0% – 5%

Drying shrinkage reduction

As per DIN-157-08

Up to 40%

Health & Safety Precautions