Floorcare HB
FLOORCARE HB is a two-component, low viscosity, amine base epoxy coating.
FLOORCARE HB is excellent high build coating. It has excellent adhesion over primed surface and excellent light movement. It provides strong monolithic bond, very high abrasion & sufficient application time to finish the job.
FLOORCARE HB is used as a hard-wearing top coat for areas were abrasion resistance less.
Plant Areas
Automobile service stations
Service & utilities area
Car Park Flooring
FLOORCARE HB is supplied in pre-packaged in exact ratio. Pour the entire contents of part B into the container of part A. Mix with mechanical drill & paddle at a very low speed for at least 3 minutes. After proper mixing to a homogeneous consistency pours the mixed parts A and B in to a fresh container and mix for another minute.
Properties:
Specific gravity, g/cc
Standards:
–
Results:
1.20 + 0.02
Properties:
Mixing ratio (R : H)
Standards:
–
Results:
4 : 1
Properties:
Surface dry
Standards:
–
Results:
1 – 2 Hrs
Properties:
Tack free dry
Standards:
–
Results:
3 – 4 Hrs
Properties:
Hard dry
Standards:
–
Results:
24 Hrs
Dosage & Coverage
Coverage rates will vary according to the nature of the substrate. 1 Kg of FLOORCARE HB shall cover 4 – 5 m2 and provide average 150 μ DFT, depending upon the porosity of the substrate.
Shelf Life
Best before 12 months from date of packaging.
Packaging & Storage
- • 5 kg composite pack.
- Store under cover, out of direct sunlight and protect from extremes of temperature. In tropical climates the product must be stored in an air-conditioned environment
Health & Safety Precautions
As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs (which can also be tainted with vapor until product fully cured or dried).
Do not reuse containers for storage of consumable item.
Treat splashes to eyes and skin immediately. If accidentally ingested, seek immediate medical attention.
Keep away from children and animals. Reseal containers after use.