Epoxy / PU Flooring > Products > Floorcare HB
FLOORCARE HB is excellent high build coating. It has excellent adhesion over primed surface and excellent light movement. It provides strong monolithic bond, very high abrasion & sufficient application time to finish the job.
FLOORCARE HB is used as a hard-wearing top coat for areas were abrasion resistance less.
Plant areas
Automobile service stations
Service & utilities area
Car Park Flooring
• FLOORCARE HB is supplied in pre-packaged in exact ratio. Pour the entire contents of part B into the container of part A. Mix with mechanical drill & paddle at a very low speed for at least 3 minutes. After proper mixing to a homogeneous consistency pours the mixed parts A and B in to a fresh container and mix for another minute.
| PROPERTIES | RESULTS |
|---|---|
| Specific gravity, g/cc | 1.20 ± 0.02 |
| Mixing ratio (R : H) | 4 : 1 |
| Surface dry | 1 – 2 Hrs |
| Tack free dry | 3 – 4 Hrs |
| Hard Dry | 24 Hrs |
Best before 12 months from date of packaging.
1 Kg of FLOORCARE HB shallcover 4 – 5 m2 & provide average 150 μ DFT
• 5 kg composite pack.
• Store under cover, out of direct sunlight
As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs (which can also be tainted with vapor until product fully cured or dried)
Treat splashes to eyes and skin immediately. If accidentally ingested, seek immediate medical attention.
Keep away from children and animals. Reseal containers after use.
Do not reuse containers for storage of consumable item.
This will close in 0 seconds
This will close in 0 seconds