V-Seal DC 118
Penetrating Methacrylic Sealer for decorative concrete
Imparts a durable, glossy, wet look on concrete surface. These solvent-based sealers are manufactured from premium, super-tough, non-yellowing acrylics. Protects exterior decorative concrete and enhances color. Can be roller or spray applied
Ready-to-Use Surface Hardener is designed for:
Stamped Concrete
Sand Faced Concrete
Exposed Aggregate Concrete
- Do not apply to fresh concrete. Recommended minimum time for concrete to cure prior to application is 7 days
- The surface must be clean and completely dry
- Apply with medium to heavy nap non-linting roller or high volume-low pressure sprayers with adequate drying time between coats (approximately two to four hours)
- Allow final coat to cure for a minimum 24 hours before opening to light traffic and 72 hours before opening to heavy or vehicle traffic
- Do not dilute the product or add any thinning agent before application.
- In case of old concrete surface, the same must be clean and completely dry prior to application
- In case of any doubt, please contact company representative before application.
Properties:
Ph value
Standards:
IS 903-1999
Results:
7.3
Properties:
Solid content (%)
Standards:
IS 903-1999
Results:
25-27
Properties:
Specific Gravity
Standards:
IS 903-1999
Results:
Less then 1
Properties:
Chloride Content (%)
Standards:
IS 903-1999
Results:
<.0010
Dosage & Coverage
35 -40 SqFt/Ltr
Shelf Life
Best before 12 months from date of packaging.
Packaging & Storage
- 25 litres Gallon
- Store in a cool, dry and firesafe environment
Health & Safety Precautions
Adequate ventilation will be necessary with the personnel wearing appropriate PPE such as gloves, eye protection, respirators, solvent resistant clothing etc.
Keep out of the reach of children.
For external applications only.
Not for human internal consumption in any form. Please seek immediate medical advice in case of accidental consumption