Stamped Concrete > Products > V-Seal DC 118

V-Seal DC 118

Penetrating Methacrylic Sealer For Decorative Concrete.

Imparts a durable, glossy, wet look on concrete surface. These solvent-based sealers are manufactured from premium, super-tough, non-yellowing acrylics. Protects exterior decorative concrete and enhances color. Can be roller or spray applied

TYPES OF APPLICATION: :

Check Icon

Stamped Concrete

Check Icon

Sand Faced Concrete

Check Icon

Exposed Aggregate Concrete

Download Product TDS

• Do not apply to fresh concrete. Recommended minimum time for concrete to cure prior to application is 7 days

• The surface must be clean and completely dry.

• Apply with medium to heavy nap non-linting roller or high volume-low pressure sprayers with adequate drying time between coats (approximately two to four hours).

• Allow final coat to cure for a minimum 24 hours before opening to light traffic and 72 hours before opening to heavy or vehicle traffic.

• Do not dilute the product or add any thinning agent before application.

• In case of old concrete surface, the same must be clean and completely dry prior to application.

• In case of any doubt, please contact company representative before application

PROPERTIES STANDARDS VALUE
Ph Value IS 903-1999 7.3
Solid Content
(%)		 IS 903-1999 25-27
Specific Gravity IS 903-1999 < 1
Chloride Content
(%)		 IS 903-1999 <.0010

SHELF LIFE

Best before 12 months from date of packaging.

COVERAGE

35 -40 SqFt/Ltr

PACKING & STORAGE

25 litres Gallon.
Store in a cool, dry and firesafe environment

Health & Safety Precautions

Solvent-based product and therefore caution must be exercised in its use –

Check Icon

Adequate ventilation will be necessary with the personnel wearing appropriate PPE such as gloves, eye protection, respirators, solvent resistant clothing etc.

Check Icon

Not for human internal consumption in any form. Please seek immediate medical advice in case of accidental consumption

Check Icon

Keep out of the reach of children.

Check Icon

For external applications only. Not recommended for works in Internal areas