PROPERTY | SPECIFICATION |
---|---|
Total Solids | 62 – 64% |
Emulsifying system | Anionic-Nonionic |
Brookfield viscosity (RVF 4/20) |
12000 – 18000 cps |
Density | 1.10 – 1.30 kg/ltr |
pH | 6.0 – 9.0 |
Waterproofing > Products > Aquashield Ultracoat (A) 8205
Waterproofing > Products > Aquashield Ultracoat (A) 8205
Water-based white pigmented compound based on specialty polymers designed to use as liquid applied water proofing membrane for RCC roofs. Can be used as Anti-carbonation coating for any exposed RCC surface.
COLOR & TEXTURE: Off-white viscous liquid
Coating of RCC & Masonry substrate.
Suitable for roofs & walls.
Priming is necessary with VAC Latex L 6006 or equivalent product.
PROPERTY | SPECIFICATION |
---|---|
Total Solids | 62 – 64% |
Emulsifying system | Anionic-Nonionic |
Brookfield viscosity (RVF 4/20) |
12000 – 18000 cps |
Density | 1.10 – 1.30 kg/ltr |
pH | 6.0 – 9.0 |
• Surface Preparation – Application surface must be cleaned of all loose and deleterious materials, dirt, dust, and laitance beforehand. It is advisable to smoothen the surface as practicable to achieve optimal consumption of product.
• High pressure water jet cleaning is recommended before application of WB 7205. It should mot be used directly on a water soaked surface; allow the surface to dry gently prior to applicaton
• Priming – Surface is to be primed with diluted compound of VAC Latex L 6006 or equivalent @ 1:1 ratio applied by brush or roller.
• Coating Application – It is advisable to apply a minimum dry thickness of 500 – 600 microns in 2 to 3 coats with an inter-coat drying time of 1 hour or till the first coat is touch dry. Approximate consumption can be estimated at around 0.70 – 0.75 kgs per m2. For best performance a sandwich application with polyester fiber mesh of 45 gsm is recommended.
PROPERTIES | VALUE |
---|---|
Tensile Strength | 3.0 N/mm2 |
Elongation at break | > 300% |
Tg (°C) (DMA) | – 8 |
Hardness (Shore A) | > 65 |
Best before 12 months from date
of packaging.
Approximately 0.70 – 0.75 liters per m² for optimal performance.
25/50 Ltrs cans/barrels.
Store in cool, dry & covered environment
(5 to 40oC)
Direct contact with skin may cause irritation. Avoid skin contact by using protective gloves. If any contact occurs, wash thoroughly with soap and water.
Should not be inhaled. It is advisable to use protective respiratory mask of good quality while handling, pouring, and mixing the powder.
Avoid contact with eyes by using proper eye protection. If such contact occurs, rinse thoroughly with clean water. If any uneasiness persists, seek medical advice.
If mistakenly ingested, seek medical advice.
Refer to MSDS for further instructions and precautions
This will close in 0 seconds
This will close in 0 seconds