PROPERTY | SPECIFICATION |
---|---|
Total Solids | 62 – 64% |
Emulsifying system | Anionic-Nonionic |
Brookfield viscosity (RVF 4/20) |
12000 – 18000 cps |
Density | 1.0 – 1.20 kg/ltr |
pH | 6.0 – 8.0 |
Waterproofing > Products > Concreteshield-WB-7205
Waterproofing > Products > Concreteshield-WB-7205
Water-based compound based on specialty polymers. White compound for liquid applications; can be pigmented to the choice of shade using any water based tint of reputed manufacturers. The dried film has excellent water repellence properties and CO2 diffusion resistance properties.
COLOR & TEXTURE: Milky white viscous liquid
Coating of RCC & Masonry substrate.
Suitable for roofs & walls.
Priming is necessary with VAC Latex L 6006 or equivalent product.
PROPERTY | SPECIFICATION |
---|---|
Total Solids | 62 – 64% |
Emulsifying system | Anionic-Nonionic |
Brookfield viscosity (RVF 4/20) |
12000 – 18000 cps |
Density | 1.0 – 1.20 kg/ltr |
pH | 6.0 – 8.0 |
• Surface Preparation – Application surface must be cleaned of all loose and deleterious materials, dirt, dust, and laitance beforehand. It is advisable to smoothen the surface as practicable to achieve optimal consumption of product.
• High pressure water jet cleaning is recommended before application of WB 7205. It should mot be used directly on a water soaked surface; allow the surface to dry gently prior to applicaton
• Priming – Surface is to be primed with diluted compound of VAC Latex L 6006 or equivalent @ 1:1 ratio applied by brush or roller.
• Coating Application – It is advisable to apply a minimum dry thickness of 500 – 600 microns in 2 to 3 coats with an inter-coat drying time of 1 hour or till first coat is touch dry. Approximate consumption can be estimated of around 0.80 – 0.90 ltrs per m2
PROPERTY | SPECIFICATION |
---|---|
Appearance | Off White, Non-transparent Film |
Surface | Non-tacky, Water repellent |
PROPERTIES | VALUE |
---|---|
Tensile Strength | 2.0 N/mm2 |
Elongation at break | > 100% |
Tg (°C) (DMA) | – 8 |
Volatile Organic Compounds | Nil |
Crack Bridging | 1 mm gap width 0.70 mm gap width for 10 cycles |
Hardness (Shore A) | > 25 |
Best before 12 months from date
of packaging.
Approximately 0.80 – 0.90 L/m² (Depending on surface porosity and application method).
25/50 Ltrs cans/barrels.
Store in cool, dry & covered environment
Direct contact with skin may cause irritation. Avoid skin contact by using protective gloves. If any contact occurs, wash thoroughly with soap and water.
Should not be inhaled. It is advisable to use protective respiratory mask of good quality while handling, pouring, and mixing the powder.
Avoid contact with eyes by using proper eye protection. If such contact occurs, rinse thoroughly with clean water. If any uneasiness persists, seek medical advice.
If mistakenly ingested, seek medical advice.
Refer to MSDS for further instructions and precautions
This will close in 0 seconds
This will close in 0 seconds