Waterproofing > Products > Aquashield-Ultracoat-6205

Aquashield Ultracoat 6205

Water-based compound based on styrene-butadiene co-polymer.

Black pigmented compound, designed to be used as a liquid applied membrane. The product has a bluish-black color which turns into a black membrane on drying through air curing.

COLOR & TEXTURE: Bluish-black viscous liquid.

APPLICATION AREAS :

Waterproofing & damp-proofing of RCC surfaces.

Suitable for roofs, podiums and water retaining structures.

Priming is necessary with VAC Latex L 6006 or equivalent product.

PROPERTY	SPECIFICATION
Polymer type	Styrene Butadiene
Emulsifying system	Anionic-Nonionic
Brookfield viscosity (RVT 10 RPM, 20°C)	14000 – 20000 cps
Total solid content	56.0 ± 1.0 %
pH	6.0 – 8.0
Appearance	Black, Non-transparent Film
Surface	Non-tacky
M.F.F.T	+ 0°C

• Surface Preparation – Application surface must be cleaned of all loose and deleterious materials, dirt, dust, and laitance beforehand. It is advisable to smoothen the surface as practicable to achieve optimal consumption of product.

• Priming – Surface is to be primed with diluted compound of VAC Latex L 6006 or equivalent @ 1:1 ratio applied by brush or roller.

• Coating application – It is advisable to apply a minimum dry thickness of 500 – 600 microns in 2 coats with an inter-coat drying time of 1 hour or till first coat is touch dry. Approximate consumption can be estimated of around 1.20 kg per m².

PROPERTIES	VALUE
Tensile Strength	3.4 N/mm2
Elongation at break	> 200%
T_g (°C) (DMA)	– 8
Volatile Organic Compounds	Nil
Crack Bridging	2 mm gap width 1 mm gap width for 10 cycles
Hardness (Shore A)	38

SHELF LIFE

Best before 12 months from date of packaging.

COVERAGE

Consumption: ~1.20 kg/m², depending on surface conditions and application method

PACKING & STORAGE

25/50/200 Ltrs cans/barrels. Store in cool, dry & covered environment

Health & Safety Precautions

Direct contact with skin may cause irritation. Avoid skin contact by using protective gloves. If any contact occurs, wash thoroughly with soap and water.

Should not be inhaled. It is advisable to use protective respiratory mask of good quality while handling, pouring, and mixing the powder.

Avoid contact with eyes by using proper eye protection. If such contact occurs, rinse thoroughly with clean water. If any uneasiness persists, seek medical advice.