Products > Construction Chemicals > CONCARE CURESEAL AC
It is a ready-to-use product which can be brush or spray applied on new concrete surface to form a thin film which acts as a barrier for escaping of inherent water from concrete. It does not affect the normal setting process of concrete.
All kinds of concrete and masonry surfaces
Best for CC roads, Bridge decks, Roofs, Columns & shear walls
| PROPERTY | SPECIFICATION |
|---|---|
| Color & texture | Milky white viscous liquid |
| pH | 8.50 ± 0.50 |
| Specific gravity | 1.030 ± 0.020 |
| Appearance | Milky white translucent film on application turns opaque once air cured |
| Conforms to | ASTM C309 Type 2 Class A (>60% reflective index) |
Coverage: 5 to 8 m² per liter depending on surface.
• Surface preparation – Application surface must be cleaned of all loose and deleterious materials, dirt, dust, laitance, mould oil etc. before application to prevent debonding from substrate.
• It is highly recommended to apply the product as soon as the water sheen from surface is seen to be disappearing and after final finishing is completed.
• In case of column beam & shear walls immediately after stripping of formwork.
• Do not dilute; stir well before use.
• Apply in two layers to achieve a uniform coating covering entire surface.
50 & 210 litres barrels
Best before 12 months from date of packaging.
Store in cool, dry & covered environment (5 to 40°C).
Direct contact with skin may cause irritation. Avoid skin contact by using protective gloves. If any contact occurs, wash thoroughly with soap and water.
Should not be inhaled. It is advisable to use a protective respiratory mask of good quality while handling, pouring, and mixing the product.
Avoid contact with eyes by using proper eye protection. If such contact occurs, rinse thoroughly with clean water. If any uneasiness persists, seek medical advice.
If mistakenly ingested, seek medical advice.
Refer to MSDS for further instructions and precautions.
This will close in 0 seconds
This will close in 0 seconds