Products > Construction Chemicals > ULTRABOND GYPGRIP
Ultrabond GypGrip is a high-performance, single-component polymer bonding agent engineered to provide exceptional adhesion of gypsum or cement-based plasters on concrete, RCC, AAC blocks and other smooth substrates. Its advanced polymeric formulation, reinforced with fine aggregates, ensures superior grip, eliminating the need for hacking or mechanical keys. Percet for interior walls and ceilings, it guarantees a durable, long-lasting plaster finish.
| PARAMETER | TYPICAL VALUE |
|---|---|
| Appearance | Light Green Liquid with Fine Aggregates |
| Specific Gravity @25°C | 1.05 ± 0.05 |
| pH | 7 – 9 |
| Solids Content (by Weight) | 25 – 30% |
| Bond Strength (pull-off)* | > 1.0 MPa |
| Coverage | 45 – 55 sq.ft / kg |
| Application Temperature | 5°C – 45°C |
| Drying Time | ~ 24 Hours |
• Superior Bond Strength: Achieves strong adhesion on RCC, concrete, AAC and blockwork.
• Saves Time & Labor: Eliminates hacking or mechanical keying.
• Non-Corrosive & Safe: Chloride-free, safe for embedded reinforcement.
• Prevents Common Defects: Minimizes delamination, cracking and hollow patches.
• Eco-Friendly & Indoor-Safe: Water-based, low VOC, non-toxic.
• Easy Application: Ready-to-use liquid,applied quickly with brush or roller.
• Bonding gypsum plaster on RCC ceilings and walls.
• Primer for for cement plaster over smooth or dense concrete surfaces.
• Adhesion aid for AAC blocks, precast panels and dense masonry.
• Suitable for residential, commercial and institutional interiors.
• Ensure the substrate is sound, clean, and free from dust, oil, or loose particles.
• Remove weak layers or laitance by wire brushing or water jetting.
• Pre-wet the surface to a Saturated Surface Dry (SSD) condition – avoid standing water.
• Stir Ultrabond GypGrip thoroughly to redistribute aggregates evenly.
• Apply a uniform coat using a quality brush or roller, ensuring visible grit.
• Allow the coating to dry for ~24 hours.
• Apply gypsum or cement plaster directly over the dried bonding layer.
20 L HDPE containers
6 months in original, unopened containers.
Keep in a cool, dry place, away from sunlight and frost
Use protective gloves, goggles, and suitable work clothing.
Avoid contact with skin and eyes; rinse thoroughly with water if contacted.
Do not ingest; seek medical attention if swallowed.
Dispose of empty containers and residues according to local regulations.
Water-based, non-flammable, and low VOC.
This will close in 0 seconds
This will close in 0 seconds