| PARAMETER | TYPICAL VALUE |
|---|---|
| Color & texture | Light Ivory Colored Powder |
| Polarization resistance | 99.6% efficiency |
| pH @ 30°C | 11.50 ± 0.50 |
| Dosage | 200–500 gms/m³ of concrete |
Forms monomolecular film on rebar surface and inhibits corrosion at both poles.
Products > Construction Chemicals > FERROCARE MTCI
FERROCARE MTCI possesses high vapor pressure, allowing its vapors to be drawn toward embedded steel rebars. These vapors penetrate even the densest concrete to reach the rebars, where they create a monomolecular ionic layer. This protective layer disrupts the corrosion process by simultaneously inhibiting both anodic and cathodic reactions, thereby preventing further corrosion.
All kinds of RCC structures.
Especially effective in corrosive environment.
| PARAMETER | TYPICAL VALUE |
|---|---|
| Color & texture | Light Ivory Colored Powder |
| Polarization resistance | 99.6% efficiency |
| pH @ 30°C | 11.50 ± 0.50 |
| Dosage | 200–500 gms/m³ of concrete |
Forms monomolecular film on rebar surface and inhibits corrosion at both poles.
• Becomes an integral part of the concrete, providing consistent corrosion protection across the entire concrete matrix.
• Gradually penetrates toward the rebar over time, effectively halting steel corrosion.
• Safe, non-toxic, and environmentally friendly.
• Preserves the bond strength between new concrete and reinforcement bars.
• Does not introduce air into the concrete mix.
• Retains the mechanical strength properties of concrete and mortar.
• To be added into concrete while in the mixing stage at specified dosage.
• Can be added before or after addition of batch water as product has no effect on rheology or thixotropy of mix
and does not alter any mechanical properties.
20 Kg Airtight Bags / Drums
Best before 12 months from date of packaging.
Store in cool, dry & covered environment (5 to 40°C).
Direct contact with skin may cause irritation. Avoid skin contact by using protective gloves. If any contact occurs, wash thoroughly with soap and water.
Should not be inhaled. It is advisable to use a protective respiratory mask of good quality while handling, pouring, and mixing the powder.
Avoid contact with eyes by using proper eye protection. If such contact occurs, rinse thoroughly with clean water. If any uneasiness persists, seek medical advice.
If mistakenly ingested, seek medical advice.
Refer to MSDS for further instructions and precautions.
This will close in 0 seconds
This will close in 0 seconds